JK 7 Inch Mini 6 Switch Panel 07-08 Wrangler JK W/Mini Bezel Multi Color sPOD

<p>JK 7 Inch Mini 6 Switch Panel 07-08 Wrangler JK W/Mini Bezel Multi Color. Compatible with 2007 and 2008 JK Models. This system will not work with aftermarket air intake systems. If you have a 4 cylinder motor, please email us and let us know!andnbsp;Will work in River Raider Off-Road Weld in Sport Cage<br /><strong>Each system includes the following:</strong></p>
<ul><li>All required mounting brackets and hardware.</li>
<li>System will come pre-wired ready to install.</li>
</ul><p><strong>Included:</strong></p>
<ul><li>Switch panel, six single light Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired)</li>
<li>Two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires.</li>
<li>Each end has an automotive connector made by Deutsch.</li>
<li>Not Recommended for cusom Rockers Switches do not have lower pilot light.</li>
<li>All wires are wrapped in high temp abrasion resistant nylon braided sleeving.</li>
</ul><p><strong>The Source 6 Circuit power distribution system includes:</strong></p>
<ul><li>12 position terminal block for accessory attachment</li>
<li>6 Bosch style cube style relays (SPST 40amp) (plug-in style)</li>
<li>6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied</li>
<li>6 Diodes to protect sensitive accessories such as LED lights from field collapse</li>
<li>Inline 50 amp manual resetting circuit breaker</li>
<li>8 gauge power leads with crimped and soldered terminal for connection to the battery</li>
<li>Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.2VDC and cuts-back in at 12.8VDC so there is enough juice to start your vehicle in case you left an accessory on!</li>
<li>Fuse for LVCO which can be removed to bypass the LVCO</li>
<li>Mounting bracket for Jeep Wranglers</li>
</ul>